Stainless Steel Compact Humidifier YC-100 – Digital Humidity Control 60–70% RH, Quiet Operation, Distilled Water

Humidifier YC-100 (4.0) delivers reliable humidity control in a compact, stainless steel chassis. The integrated fan creates a fine water mist while the digital panel lets you set a start humidity and a stop humidity to hold a consistent range (for example, 60%–70% RH). A floating ball indicator makes it easy to check tank level, and the unit operates quietly for offices, retail displays, and storage cabinets.

Key Features

• 304 stainless steel construction; small, clean footprint
• Quiet operation with high atomization efficiency
• Digital humidity controller with separate start/stop set points
• Simple controls: long-press Up to set start humidity; long-press Down to set stop humidity
• Floating ball shows water level for quick refills
• Designed for use with distilled water

Specifications

• Model: YC-100 (4.0)
• Power Supply: 110/220VAC, 1-phase, 50/60Hz
• Power Consumption: 17W
• Unit Dimensions: 13.87" x 8.07" x 8"
• Net Weight: 7.9 lb (3.6 kg); Gross: 9.5 lb (4.3 kg)
• Working Temperature: 33–104°F
• Feed Water Temperature: 33–95°F
• Recommended Water: Distilled water only
• Carton Dimensions: 16.54" x 10.24" x 9.84"

Operation

• Connect power. The screen shows the current humidity (%RH).
• Set humidity range: Long-press the Up key until the value flashes; use Up/Down to set the start humidity (e.g., 60%). Long-press the Down key until the value flashes; set the stop humidity (e.g., 70%).
• Add water: Fill through the water inlet mesh enclosure. Keep the floating ball between approximately “5.5–8”. Do not overfill.

Quick Tips

• Factory reset: With power connected, press the Up/Down key for ~3 seconds until the display shows “888”, then the unit returns to humidity display.
• Sensor notice: If the panel displays “LLL”, check or replace the humidity sensor.

Note: Maintain the unit with distilled water and regular cleaning for best performance and longevity.